|
|
- Reinforced
Epoxy Putty (12/Case) (PDF) Bolster Steel is a hand-kneadable, non-rusting, reinforced steel, copper, Aluminum, Plastic, Concrete, Aqua (for around or under water use) or General Purpose epoxy putty that repairs or rebuilds in minutes. This industrial strength product cures hard and bonds tenaciously. After final cure it can be drilled, tapped, machined, ground or filed. Availble in/for: Aluminum, Aqua, Concrete, Copper, General Purpose, Plastic, Steel or Wood. |
|
|
- Foam Insulation (Aerosol) (PDF) This expanding flame retardant foam sealant is a one component moisture cure polyurethane foam which yields 220 lineal feet of 3/8 “ bead. When filling a cavity do not fill completely, foam will expand 2-3 times. Dries tack free in 30 minutes, fully expands in one hour, and cures in 8-24 hours depending on humidity. Cured foam can be trimmed with a sharp knife or sanding. Cured foam exposed to sunlight must be covered with paint or stain. |
| - Quick Masonary Repair Formula (5GA Pail)
(PDF) Quick repair may be used to patch concrete, masonry and brick. Also may be used to repair side walks, driveways, swimming pools, foundation walls and other similar masonry structures. As simple as 1-2-3 Recrete can be in place. Mix with water and work the material into the surface. Apply 1/8" or over 2" Thick in One Coat. In 10-25 minutes at temperatures between 60-75 degrees Fahrenheit, the quick repair formula will be setup and ready for light traffic in 2 hours. |
|
| - Heavy Duty Spray Adhesive (Aerosol) (PDF) This wide web spray adhesive is one of the highest performance aerosol adhesives available. For both temporary or permanent bonding, this product is ideal for uneven or porous surfaces and weight materials. Waterproof, flexible, transparent, and non-staining, use this product for your toughest adhesive applications with materials such as leather, cardboard, most plastics, polyethylene sheeting and cloth. Contains no chlorinated solvents or ozone depleters. High solids. |
|
| RTV
Gasket Maker/Sealer (Aerosol) (PDF) - The Blue is good for 450 Degrees F. and Peaking at 500 Degrees F. - The Clear is good for 450 Degrees F. and Peaking at 500 Degrees F. - The Red is good for -60 Degrees F to 600 Degrees F The silicone gasket maker is a single component room temperature vulcanizing silicone rubber. When applied as a formed-in-place gasket, it reacts with moisture in the air and cures to a rubber like product. The gasket maker/sealer will adhere to clean metal, glass, most types of woods, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fiber as well as painted and plastic surfaces. Good for 450 Degrees F. and Peaking at 500 Degrees F. |
|
| - Blue RTV Gasket Maker/Sealer (Aerosol)
(PDF) The Clear silicone gasket maker is a single component room temperature vulcanizing silicone rubber. When applied as a formed-in-place gasket, it reacts with moisture in the air and cures to a rubber like product. True Seal Clear will adhere to clean metal, glass, most types of woods, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fiber as well as painted and many plastic surfaces. |
