|
|
- Cuting
Fluid & Coolant (Aerosol) (PDF) This Cutting Fluid is formulated for all types of machine shop uses. This high performance coolant/lubricant increases production, protects tools, helps provide quality machine parts. This is a heavy-duty concentrated cutting oil fortified with active sulfur and an extreme pressure additive. It can be utilized on the most difficult machining operations on the hardest & toughest alloy steels and thread cutting & tapping operations. Beacause of its high active sulphur content, it is not recommended for use on copper or aluminum or where bright finishes are required. |
| - Chain and Cable Lubricant with Moly
(Aerosol) (PDF) Thick black foam that clings to vertical surfaces ... As foam breaks, product penetrates into wire rope, link, and roller mechanisms. It is recommended for use in severe climatic conditions, The lube provides resistance to wear, extreme pressure capability and will not break down under high temperatures |
|
| - Chain and Cable Lubricant with Molybdenum
Disulfide and PTFE (Aerosol) (PDF) This product is an outstanding, full service, multiple application, chain and cable lubricant. Fortified with both molybdenum disulfide and PTFE, the formula will provide superior lubricity, protection, and longevity. Use this product on chains, cables, wire ropes, sprockets, drive chains, hoist chains, drag chains, and conveyor chains to prevent metal to metal contact and reduce friction, heat, stress, and wear during operation. Very water and acid resistant. In addition, the special aerosol valving system allows for precise control of material delivery with minimal splashing and/or overspray. This next generation product is formulated without chlorinated solvents or ozone depleters. |
|
| - Clear Teflon Penetrating Gel Lube (Aerosol)
(PDF) The penetrating Gel Lubricate lasts longer than conventional lubricants It resists water washout and withstands severe temperatures from -30 F to over +600 F. It prevents sticking & freezing of rubber to metal and prevents rust & corrosion. It's excellent to use on door hinges, open gears, wire ropes and cables,chain and sprockets, conveys, and legs on hoists. |
|
| - Dry Moly Lube (Aerosol) (PDF) This lubricant is oil free and can be used as a Releasing Agent and Anti-Seize. It features a temperature range of -110 degrees F to 1,000 degrees F. It has a very low coefficient of friction and is chemicaly inert to water, oil, alkalies and many acids. It will not attract dust and burnishes into metal for excellent anti-seize and anti-friction properties. It can be used in Foundries, Engine Rebuilders, Chemical Plants, Paper Converting, High Speed Gears and Chains, Wire Drawing, Conveyors, Bearings and Pump Assemblies. |
|
| - Food Grade Lube & Wire Pulling Compound (Aerosol) | |
|
|
- Heavy
Duty Dry Silicone Lubricant (Aerosol) (PDF) Use On Any Surface: Metal, Glass, Rubber, Plastic, Painted finishes and Fabrics. Stops Sticking - Drawers, windows, doors, screens, zippers, locks, etc. Eliminates annoying squeaks in hinges, latches, springs, etc. Retards Corrosion - protects battery terminals, tools, guns, skates, aluminum windows and doors. Helps Prevent - grass, dirt and mud from sticking to lawn mowers - snow from sticking to snow shovels. Dries Fast - leaves no greasy or oily film - not affected by water, oil or solvents. |
| - High
Temperature Anti-Seize (Aerosol) (PDF) This Anti Seize has a Temperature Range of -60F to 2125F. It lubricates, seals and protects. It is non gumming, non melting, non hardening, with excellent adhesion. It also is compatible with other lubricants, prevents galling, seizing, galvanizing action, repells water and has a high E.P. Capability. It's three products in one: a High Temp anti-seize for nuts, bolts, studs etc. - A Premium quality lubricant for bearings, slides, etc. - Protective coating for service in highly corrosive environments. |
|
| - Aluminum
Based Anti-Seize (Can w/Brush) (PDF) A Anti-Seize Compound with a brush provides excellent protection over a long period of time for threaded fittings, gaskets, bushings, pumps, exhaust systems and furnaces. Great For: Engine Head Bolts, Ehaust Manifold Studs, Starter & Alternator, Spring Bolts & Lug Nuts. |
|
| - Specialty
Red Grease (Cartriage 24/Case) (PDF) This Red Grease is an all purpose non-melt grease specially formulated with extreme pressure and anti-wear additives to provide heavy duty service. It is one of very few greases able to withstand heavy shock load capabilities. This product has excellent adhesive and cohesive properties. It resists most acids, weather, dirt, salt spray, steam and oxidation. Our product protects equipment indoors or outdoors even under high temperatures and heavy loads. |
|
| - Super Impact Grease (Cartriage
24/Case) (PDF) This product is a multi-purpose grease fortified with special additives enabling it to with stand the heavy impact and pounding pressures common to heavy equipment. Our special additive package allows the grease to stay in place and not to spatter or pound out of the bearing or fitting. Most greases manufactured today do not have this anti-spatter capability. |
|
| - Ultra High Temp
Synthetic Grease (Cartriage 24/Case) (PDF) Ultra high Temp Synthetic Blend Grease is a metallic silver combination of an olefinic copolymer anti-seize compound and a non-soap bentone grease. It is fortified with additives that will provide it with excellent lubricating properties, stability and anti-wear protection to metal surfaces. |
|
| - Moly Grease (Cartriage
24/Case) (PDF) Our MOLY-GREASE is a non-melt gray colored lubricant containing molybdenum disulfide. This product is fortified to provide anti-wear and low friction performance through a wide temperature range. The molybdenum disulfide contained in MOLY-GREASE reduces friction and protects against excessive wear, from extreme loads, galling and seizing. The moly “plates out” on metal surfaces, imparting extra protection to the parts and extending the lubrication cycle. MOLY GREASE is exceptionally resistant to most acids, salt spray, steam, dirt, dust, water, oxidation and weather. Our product has excellent adhesive and cohesive properties, as well as high shock protection. MOLY-GREASE protects equipment indoors or outdoors, even under high temperatures and heavy loads. |
|
| - White Guard Supreme (Catriage 24/Case) (PDF)White Guard Supreme with PTFE is a special high temperature polymer grease engineered specifically for the food processing and packaging industry. It is authorized by USDA for use in federally inspected meat and poultry plants. It is compounded with EP and anti-wear additives as well as rust and oxidation inhibitors. It possesses good adhesion/cohesion properties and is water insoluble and very resistant to water washout. This premium grease has a neutral petroleum odor and is nonstaining. |
